EdgeOne Fire
EdgeOne Fire™ features EdgeEndo’s Heat-Treated Fire-Wire™ NiTi and is designed to shape canals in a reverse-reciprocating motion. EdgeOne Fire™ is offered in sizes Small, Primary, Medium and Large. Lengths available are 21mm, 25mm and 31mm.
EdgeOne Fire works with existing handpieces operated at the WaveOne Gold parameter. EdgeOne Fire tests at twice the cyclic fatigue as WaveOne Gold (see detail here).
Heat-Treated FireWire™ NiTi alloy is an innovation in file metallurgy. It makes our files more flexible and significantly increases resistance to cyclic fatigue. FireWire™ NiTi enables EdgeEndo® files to not “bounce back”, preserving canal anatomy, and carefully follows the canal as they shape.
EdgeTaper Platinum
EdgeTaper Platinum™ features EdgeEndo’s Heat-Treated Fire Wire™ NiTi. The files have a convex triangular cross section that maximizes file cutting efficiency. EdgeTaper is meant to be used in a sequence, SX-S2 then F1-F2. Lengths available are 21mm, 25mm and 31mm.
EdgeTaper Platinum works with existing handpieces operated at the ProTaper Gold parameter.
Heat-Treated FireWire™ NiTi alloy is an innovation in file metallurgy. It makes our files more flexible and significantly increases resistance to cyclic fatigue. FireWire™ NiTi enables EdgeEndo® files to not “bounce back”, preserving canal anatomy, and carefully follows the canal as they shape.
EdgeTaper™
EdgeTaper™ files are not heat-treated giving the files memory with incredible strength. Files have a convex triangular cross section which maximizes file cutting efficiency. EdgeTaper is meant to be used in a sequence, SX-S2 then F1-F2. Lengths available are 21mm, 25mm and 31mm.
EdgeTaper works with existing handpieces operated at the ProTaper parameter.
EdgeOne Fire GlidePath
EdgeOne Fire™ GlidePath features our Heat Treated FireWire® NiTi and is used with our EdgeOne Fire™ system. EdgeOne Fire™ GlidePath is designed to shape the canal in reverse-reciprocating motion with a parallelogram cross-section and a tip size of 19. Available in lengths 21mm, 25mm, and 31mm with three same size files in each pack.
EdgeGlidePath
EdgeGlidePath features EdgeEndo’s Heat-Treated Fire-Wire™ NiTi. Files are size 19.02 and available in 21mm, 25mm and 31mm. Replacing as many as 8 instruments to create a glidepath faster; #15, 20, 25, 30 & 35 hand files in a step-back technique and a #1, 2 & 3 Gates Glidden
Heat-Treated FireWire™ NiTi alloy is an innovation in file metallurgy. It makes our files more flexible and significantly increases resistance to cyclic fatigue. FireWire™ NiTi enables EdgeEndo® files to not “bounce back”, preserving canal anatomy, and carefully follows the canal as they shape.
EdgeGlidePath works with existing handpieces operated at the ProGlider parameter.
Studies
EdgeFile X7
EdgeFile X7 is equivalent to your current 04/06 taper rotary file system, and requires no change in motor.
X7 is the #1 selling EdgeEndo NiTi system. It has been recognized globally as a proven solution. EdgeEndo’s proprietary FireWire™ Heat-Treating process gives the EdgeFile X7, “Canal Contouring Technology,” making the files extremely flexible and reducing the shape memory and “bounce back” effect of other NiTi files. The flexible EdgeFile X7 closely follows the anatomy of the canal without straightening out, reducing the risk of ledging, transportation, and perforation.
The flexible shaft reduces the need for excessive straight-line access, allowing more tooth structure to be preserved. It’s tight pitch flutes and flexibility has made it one of the greatest systems that is able to fit the technique of most dentists. Offered in .04 and .06 tapers in sizes 17-45 and lengths 21mm, 25 mm and 29mm. It has repeatedly outperformed competitor files in peer review studies.
Customer reviews rank the X7 as the most flexible, versatile, and cyclic fatigue-resistant (file separation resistant) file from EdgeEndo. Alleviate your stress with this super flexible and strong system.
EdgeFile X7 works with existing handpieces operated at the ProTaper NEXT parameter.
Features and Benefits:
- Parabolic Cross Section - Non-Cutting Tip
- Constant Taper - Variable Pitch
- Has a positive rake angle
- Does not have radical lands
- Electropolished Manufacturing Process
- “FireWire” Heat Treatment
